sintered product meaning in Chinese
烧结制品
Examples
- Powder metallurgy . determination of the oil content of porous sintered products
粉末冶金.多孔烧结制品中油含量的测定 - Metallographe stadard specifications for powder metallurgy iron - based sintering products
铁基粉末冶金烧结制品金相标准 - Permissible deviations in dimensions without tolerance indication for metallic sintered products
无公差指示的金属烧结产品的尺寸允许偏差 - Powder metallurgy . sintered metal materials , excluding hardmetals . determination of hardness . part 3 : sintered products hardened on a surface by other treatments than in nf a 95 - 321 - 2
粉末冶金.硬质合金除外的烧结金属材料.硬度的测定.第3部分:除在nfa 95 321 - 2中表面硬化处理以外的烧结产品 - Some tests for liangang sinter adding bos slag have be done in the laboratory and plant trial . the results show that in the range of bos slag percentage , from 0 % to 8 % , with the increase of bos slag percentage , the sinter speed has been lower , but the sinter strength and productivity of sinter product have been higher , the sinter productivity will be the maximum when bos slag percentage is 4 % ; the siner reducibility has been improved , the normal operation of bof will not be effected anymore because of the circulation of p form bos slag
对烧结矿配加转炉钢渣进行了实验室研究和工业试验，在钢渣配比0 % 8 %的范围内进行的研究表明：随着钢渣配比的增加，烧结速度稍有下降，烧结矿强度、烧结成品率均有所提高，利用系数在4 %左右时达到最大值；烧结矿还原性得到改善；钢渣中带入的p的循环富集不会影响炼钢的现行操作。